“Mounting Your TV: Tips for a Safe and Secure Setup” Complete Guide

As you plan to upgrade your entertainment system, the thought of mounting your TV to the wall may feel daunting. But don’t worry! You can securely and safely mount your TV with ease.

In this guide, we’ll provide you with tips and advice on how to do it right. So, get ready as we help you get started on setting up and mounting your TV like a pro!

Mounting your television is a great way to enhance your home viewing experience and gain more space in the room. But if done incorrectly, it can lead to potential risk of damage or injury. Therefore, it’s important to make sure your TV is installed properly and securely with the appropriate tools and materials for the job.

This guide will provide you with helpful tips on how to safely mount your television so that you can enjoy worry-free viewing.

Explanation of the importance of safe TV mounting

Mounting a television to a wall or other vertical surface is a great way to save space and add a modern look to any home. But, unless done properly, it can also be dangerous. Fortunately, with careful preparation and the right tools, mounting a TV can be done safely and easily.

It is important to remember that TVs are very heavy and fragile objects; doing too much or using the wrong hardware could cause the set to become loose or even worse, fall off of the wall completely. Therefore, following instructions precisely and being mindful of safety precautions should always be top priority when mounting your television. Additional precautionary measures such as making sure the wall you’re mounting your TV on can withstand its weight should also be taken into account in order for your setup to be successful.

It also helps if you have someone nearby who can help you lift up the TV and make sure everything is lined up correctly before you start drilling into walls or tensioning wires. In any case, having existing knowledge on installation steps as well as providing yourself adequate time and patience are key components in ensuring that your television will remain secure once it has been mounted properly. This guide will take you through all of these steps—continue reading below for specific instructions on how to mount your television safely!

Man Fitting Bracket For Flat Screen TV Onto Wall

Brief overview of the tips to be discussed

To ensure that your TV is mounted safely and securely, it’s important that you take the time to properly plan out and understand the steps involved. The following tips will help you do just that:

  1. Determine the Correct Mounting Method: Wall mounting or ceiling mounting are the two most common methods. Choose the best option for your specific situation taking into account any steps related to cables, wiring, and other hardware you may need to buy for an optimal setup.
  2. Select the Proper Bracket: Take into account factors such as weight limits, tilt degrees, VESA requirements, clearance from walls and other furniture, etc., when selecting an appropriate wall mount bracket or ceiling mount kit for your TV.
  3. Locate Fastening Points on Your TV or Wall: Many wall brackets come with fastening points attached while some require you to locate them on your own (in between wall studs or directly in drywall). If hardware needs to be located on your TV such as screws locating mounting holes then make sure you know where they’re located before beginning installation for better support of your TV.
  4. Mount Securely in Place: After verifying all components are securely installed it’s time do final tightening of screws and bolts once everything is lined up correctly in place (flat against walls with no wobbling). Add additional fastening points if necessary and use a level to check that everything is properly aligned before finishing up installation.

Determine the Best Location for Your TV

Finding the right location for your flat-screen television can be a challenging task, especially if you want to make sure it is safe and secure. When choosing where to mount your TV, consider these factors:

– Will other people be in the room while watching TV? If so, you’ll want to make sure that it’s mounted in a comfortable position for everyone in the room. This could mean mounting it higher up on the wall if there are any smaller children in the house.

– Consider what else is being used in the room. Will you be watching TV from a couch or armchair? Make sure your television’s mounting place does not interfere with the furniture or other objects in the room that could cause an obstruction.

– Be mindful of possible electrical problems. Make sure your mounting location does not interfere with any power outlets, and take extra caution when running cords to minimize potential fire hazards.

– Check if exterior walls are suitable for mounting TVs; some materials such as brick or concrete may require additional steps and safety precautions during installation.

Finally, make sure that you’re comfortable with your selection before settling on a final mounting location; once installed, it will be difficult (and expensive) to move around!

Consider the viewing angle and height

When it comes to mounting your TV, consider the viewpoint when determining the best height and angle for your TV. Watching a television at an incorrect angle can cause strain on your neck and shoulders, so it’s essential to make sure the screen is up at an ideal elevation and distance.

To determine what height is right for you, look straight ahead while sitting comfortably on your couch or favorite seating area then measure the approximate distance from the seat to eye level. Aim to mount the television at roughly this level. If you intend on mounting your television higher than eye level, keep in mind that you will need to adjust the angle of the TV appropriately.

Make sure that any surrounding furniture is positioned at a comfortable viewing distance for everyone who might use it (unless another angle of view is intended).

Evaluate the available wall space and room layout

Choosing a mounting location is one of the most important steps when it comes to mounting your TV. Make sure you take into account the layout of your room and the amount of space on the wall where you plan to mount it. Consider the surrounding furniture and whether or not your TV will be visible from other areas of the house. That way, you won’t have any surprises after installation is complete.

The wall mount should have sufficient space for all cables and connectors needed for power, video, audio, and other purposes. Additionally, make sure that there is enough height clearance around the area you’re mounting so that other furniture won’t block access to your TV in any way. And if possible, make sure there are no potential hazards that could cause damage to your electronics or put people at risk should they bump into them while passing through the area.

Install the Mounting Hardware

Installing the mounting hardware is an important step in guaranteeing that your television is secured safely and securely to the wall. Before you start, double-check to make sure that you have all the necessary materials and tools listed in your instructions manual and contact a professional if you have any questions or concerns. Follow these steps to install your mounting hardware:

  1. Decide where you want to mount your TV, making sure it’s at least 15 inches above furniture or other surfaces that people use for viewing, and avoid direct sunlight. Once you’ve chosen the best location for your TV mount, mark out where each wall anchor needs to go by either using a pencil or level to draw your desired points on the wall or use a stud finder.
  2. Determine what type of wall anchors (drywall anchors, toggle bolts) you need based on how much weight they need to support and whether they’re going into sheetrock or concrete walls. Insert all of the needed bolts into their respective holes, then place washers on top of each one so they lay flat against the wall when tightened.
  3. Use the appropriate drill bit for pre-drilling into each mark on the wall before screwing in any screws or bolts; this ensures that everything is lined up properly before you tighten them down completely with a wrench or screwdriver.
  4. Place two mounting plates onto either side of your TV with their anchors pointing outwards from where they need to be installed, then align them with predrilled holes and markings as indicated by manufacturer instructions or technical drawings for reference; use only screws provided by manufacturer as indicated by model specs in product manual when attaching plates evenly onto back of TV along predrilled holes, tightening down for secure fitment; repeat steps 3 – 4 for other side if using two separate mounting pieces like adjustable tilt clips vs universal swivel plates Review installation once more by gently shaking each side before drilling in final mounting screws/bolts/nuts once everything looks aligned correctly and securely attached without any loose parts as per all safety guidelines listed within product manual/instructions set included upon purchase of mount assembly kit.

Follow the manufacturer’s instructions carefully

A safe TV setup starts with a thorough read-through of the manufacturer’s instructions. If a manual is not available, look for instructions online. Following the instructions carefully will ensure you don’t miss any important details about the mount and its installation. Additionally, following the manufacturer’s instructions will help you take advantage of any warranty that may be included with your purchase, which can be especially helpful if you run into any issues during installation or mounting. Pay special attention to recommended cable connections and to any accurate measurements that need to be taken.

Although each mount may differ slightly from one another in terms of set up, generally they all include four main steps; these involve attaching the mount to either a wall or ceiling, securing your TV onto the mount itself, connecting cables between your TV and other devices, and finally (though equally importantly) properly concealing all cables after connecting them.

Secure the mount to the wall studs

Securing the mount to your wall studs is essential for a safe and secure setup. Wall studs are exterior walls with wood joists that run behind the drywall. These provide the best support for your TV mount, as other types of walls with just drywall are not capable of supporting the weight of most televisions.

To find wall studs, use a stud finder or lightly tap your wall in sections until you feel more solidity. Mark the edge of each stud to ensure that you’re drilling into a strong part of the wall. Use a drill/driver to predrill and secure in place lag bolts if included with your mount.

For heavier TVs, typically 70 inches and above, you may need additional supports such as pole struts or base extensions included with many mounts to distribute weight more effectively onto multiple wall studs. After securing the TV mount into place, test it by shaking it gently — it should not move at all.

Mount Your TV

After you’ve bought the mounts and other equipment that you need, it’s time to mount your TV. Depending on the type of wall mount you chose, there may be additional steps before or after you begin the actual mounting process. For example, if you are using a full motion or articulating mount then some initial cleanup or adjusting may be necessary to get it fully installed.

While assembling and mounting a TV might seem intimidating at first, it is actually quite a straightforward process if done correctly. It generally consists of four simple steps: preparing the wall mount, calculating where your TV should be positioned on the wall, attaching the wall mount to the wall studs and then attaching your TV to the mount.

Before proceeding with any installation, check with your user manual for instructions specific to your particular setup. Additionally, make sure that all safety requirements are met. With these tips in mind, let’s look at each step in more detail:

  1. Preparing Your Mount: Check that all parts are accounted for and read over included instructions prior to beginning assembly of your mounts. If something is missing or not clear then contact customer service as soon as possible for assistance with assembly/installation concerns.
  2. Calculating Placement: Before marking off where you will attach your mount calculate where exactly on the wall it should go based on desired viewing height and other factors such as cord length/accessibility or window position relative to seating area (to avoid reflection from natural light).
  3. Attaching Wall Mount: When ready start by attaching screws into each end of each Wall stud for security purposes before finally joining one end of each bracket together via provided hardware so that they can later hold weight of Television safely and securely against wall when hung properly according*. New screws should be purchased when connecting bolts/screws into existing drywall sleeves/holes as previous fasteners may not meet current live loading requirements necessary for proper installation*. Lastly attach back plate by sliding over lag bolts provided until they firmly snap into place before tightening using required torque settings given in packing materials (or associated User Manual)*. (Please note: use self-tapping concrete anchors while installing TV on any surface other than drywall)*. (Reminder: seek professional assistance if needed)
  4. Attaching Your Television*: Once everything has been mounted onto studs properly use mounting hardware provided by manufacturer to attach television ensuring threaded posts align properly with corresponding holes in back panel; use same torquing procedure applied earlier when assembling brackets also tighten all screws evenly and firmly before testing load capacity limits of both walls plus brackets combined (if unsure consult an expert).

Enlist the help of a friend or family member

Enlisting the help of an extra pair of hands can make mounting your TV much easier, as having multiple people involved can speed up the process and help ensure accuracy. Ask someone you can trust to assist you who is also comfortable with tools, as they will be able to ask questions and assess any risks more accurately.

Another person can provide assistance when lifting the TV up, plus they will help ensure the screen is installed in a correct and even manner. Additionally, if the size of your television allows it, carrying it with someone else means you both have better control over exactly where you want it and avoid any potential swaying or slipping during transport.

Carefully lift the TV and attach it to the mounting bracket

Before lifting the TV onto the mount, it is important to check that all of the components are firmly attached and secure. Make sure that all cables are carefully organized and out of the way; you don’t want them to get stuck or kinked as you move it up. Put on protective gloves if the TV is especially large or heavyweight; this will prevent fingerprints and potentially slippery surfaces from causing any issues.

Next, holding onto the base of your TV (or teaming up with a friend to do this step), carefully lift it up onto the mounting bracket. It’s possible to adjust most mounting brackets to various heights; simply swivel or slide your mount until your television is in a comfortable height for viewing. Be sure that all connections are properly plugged in and secured before letting go of your TV. If possible, double-check that everything is plugging in properly by testing them out before locking them into place. Doing so will ensure a secure installation and help protect against potential disasters down the road!


In conclusion, mounting your TV can seem daunting, but it’s totally doable. Just make sure to use the right hardware and tools and follow the instructions closely. Don’t be tempted to cut corners; taking proper safety precautions is key to getting a secure and safe setup.

Remember also that it’s important to get the right accessories and mount for your TV size and weight. Ensure that your wall and mount are able to take the weight of your TV, as exceedings what they are rated for can cause damage — or worse. Don’t forget about cords either; make sure you choose a mount that is cable friendly, or put in the effort to conceal them if you don’t want them in plain sight.

Finally, once everything is set up correctly, sit back and enjoy watching TV with ease!


What is the most secure way to mount a TV? 

The most secure way to mount a TV is to use a wall mount bracket that is securely attached to a stud in the wall.

How can I make my TV wall mount more secure? 

To make your TV wall mount more secure, ensure that the bracket is properly attached to the wall with the appropriate screws and anchors, and that the TV is attached to the bracket according to the manufacturer’s instructions.

How do you secure a mounted TV from theft? 

To secure a mounted TV from theft, use security screws or bolts to attach the TV to the mount, or use a lockable mount or cabinet.

What to avoid when mounting a TV? 

When mounting a TV, avoid mounting it on an unstable or weak surface, mounting it too high or low, or using incorrect or insufficient hardware.

How can I secure my TV without screws? 

To secure your TV without screws, you can use adhesive strips or Velcro, a stand or base, or a freestanding mount.

Is it safe to mount TV on any wall? 

No, it is not safe to mount a TV on any wall. Only mount a TV on a wall that can support the weight of the TV and the mount.

What is the safest way to move a TV? 

The safest way to move a TV is to use a protective cover or box, handle the TV carefully, and secure it in a stable position during transport.

Can you secure a smart TV? 

Yes, you can secure a smart TV by using strong passwords, updating software regularly, and disabling any unnecessary features or connections.

Is it better to mount TV on wall or stand? 

Whether to mount a TV on a wall or use a stand depends on personal preference and the layout of the room. Wall mounting can save space and provide a clean look, while using a stand allows for more flexibility in placement.

How do I secure my TV to the wall in my apartment? 

To secure your TV to the wall in your apartment, you will need to use a wall mount bracket that is appropriate for the size and weight of your TV, and attach it to a stud or use appropriate anchors. Be sure to follow the manufacturer’s instructions carefully.

See Also-

Leave a Comment